NC storage and
transport unit
WORKSHOP PROFESSIONALS
Huni’s NC storage and transport units are the perfect solution for workshop logistics. In fact, our NC modules not only allow you to store chip removal tools professionally in suitable storage units, but also to transport them safely.
In addition, the tools are arranged in such a way to ensure they are visible without taking up too much space, yet always within reach and ready for immediate use.
But that’s not all: our NC modules can be set up according to individual requirements and can, of course, be combined with the entire Huni system to make optimum use of the valuable space in your production facility.
MAXIMUM EASE OF USE AND
ERGONOMICS
By means of tilting supports or pull-out shelves
and drawers.
OPTIMUM USE OF SPACE
By positioning tools close to machines, reducing
space, as well as considerable storage capacities.
SAFE, CLEAN AND VISIBLE STORAGE
In high-quality housings made of break-resistant,
impact-resistant and oil-resistant propylene (PP),
which perfectly accommodates the chip removal
tools.
SAFE TRANSPORT
Thanks to its robust and stable design.
INDIVIDUAL AND SIMPLE EQUIPMENT
Due to the offset position of the tool holder
sleeves.
Transport trolleys
Steel tube and sheet construction, powder coating according to colour chart.
Vertical walls with hole grids at 25 mm intervals enable three tool frames to be attached at the same level.
Equipped with four castors Ø 125 mm (two fixed and two swivel with brakes) and a handle.
Trolley bracket
Made of sheet steel, with all-round edging and base with ribbed rubber mats. Can be screwed to the front wall. Fastening material included.
Adjustable shelves
Made of sheet steel, with all-round edging and base with ribbed rubber mats.
Can be screwed to vertical walls.
Fastening material included.
Document pocket
Made of sheet steel, colour grey RAL For storing drawings or technical documents with max. DIN A4.
Can be screwed to a vertical wall.
Fastening material included.
Table stand
Made of sheet steel, powder coating according to colour chart.
For the support of max. three tool frames, finds its location on benches, cabinets, etc.
Tool cradles
Made of sheet steel, colour grey RAL 7035.
They are inserted into pairs of countersunk racks attached to the trolley walls or drawers.
Length 592 mm, width 136 mm, load capacity 50 kg and one handle.
Trolley frame holder pairs
Made of sheet steel, colour grey
RAL 7035.
For supporting tool holders in trolleys.
They can be arranged horizontally or at an incline of 20°.
Fastening material included.
Coppie portatelai per armadi o scaffali a cassetti
In lamiera d’acciaio, colore grigio RAL 7035.
Per il sostegno dei telai portautensili negli armadi o scaffali a cassetti.
Si possono disporre orizzontali o inclinati a 20°.
Materiale di fissaggio incluso.
Coppie portatelai fissi per cassetti
In lamiera d’acciaio, colore grigio RAL 7035.
Per il sostegno di quattro telai portautensili.
Vengono avvitati sul fondo dei cassetti.
Materiale di fissaggio incluso.
Contattaci
Lascia un messaggio e verrai ricontattato dal nostro staff nel più breve tempo possibile.
A tua disposizione
Richiedi una consulenza completa da un nostro tecnico specializzato.
